A nuclear reactor uses a nuclear fission chain reaction to produce energy. The cylindrical core of a reactor consists of fuel rods containing pellets of fissionable material, usually uranium 235 or plutonium 239. These unstable isotopes readily split apart into smaller nuclei (in the fission reaction) when they absorb a neutron; they release large quantities of energy upon splitting, along with more neutrons that may be absorbed by the nuclei of other isotopes, causing a chain reaction. The neutrons are expelled from the fission reaction at very high speeds, and are not likely to be absorbed at such speeds. Moderators such as heavy water are therefore needed to slow the neutrons to a speed at which they are readily absorbed. The fuel rods contain enough fissionable material arranged in close enough proximity to start a self-sustaining chain reaction. To regulate the speed of the reaction, the fuel rods are interspersed with control rods made of a material (usually boron or cadmium) that absorbs some of the neutrons given off by the fuel. The deeper the control rods are inserted into the reactor core, the more the reaction is slowed down. If the control rods are fully inserted, the reaction stops. The chain reaction releases enormous amounts of heat, which is transferred through a closed loop of radioactive water to a separate, nonradioactive water system, creating pressurized steam. The steam drives turbines to turn electrical generators.