This consists of a screw, screw-eye, bur and a metal strip, ¾ × 1¼ in.
This plate is soldered to the shank of the screw-eye and the cleat is complete.
Any outside wires which are to be joined to the apparatus should be clamped under the bur by turning the screw-eye.
The fly-killer is hung up by a screw-eye placed in the end of the handle.
Each "rope" of the rigging should have its own screw-eye (or staple) and cleat on the deck.
The screw-eye at s ought to be about level with the top of the post.
After filling the bottle, cork it up, and screw a screw-eye into the cork.
When the lift is on the ground, pull the strings taut and tie a knot below the screw-eye.
The opposite end of the rubber bands are fastened to a screw-eye driven into the under side of the bow.
Now run the elevator up to the top of the shaft, and mark upon the ceiling where the screw-eye in the top of the car strikes.