Scratch-card, a wire brush to remove tarnish from lead before soldering (p. 144).
Clean the tops, bottoms and sides of the connectors with a wire brush, Figure 143.
Faradism is applied in the form just described, using a wire brush as an electrode to the areas of numbness and anæsthesia.
Brush the sides and end with a wire brush; also brighten the name plate.
This consisted of square board with a handle, and was covered by fine wire driven in, so as to make what was really a wire brush.
His wire brush lifted and all his strength seemed to ooze away.
Brush the tops of the post and connector thoroughly with a wire brush to remove any dirt which may have been floating in the lead.
The upper ends of plate lugs may be cleaned with a flat file, knife., or wire brush.
Clean them with a wire brush, and oil the threads on the bolt and in the nut to make them work easily.
Attach the other high tension wire to a wire brush, comb, or rod having a wooden handle and rub it over the outside of the jar.